All Wine Products

This collection of ecological Mahogany bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Rack for Bulk bottles BIN 16 32
Capacity: 46 bottles
Dimensions: 32″ H x 16″ W x 9.5″ D

Assembly parts and wall mounting clips included. Bin divider sold seperatly.

Others types of module are  available : burgundy, champagne, bulk, cases etc.

Also available a whole series of finishing accessories (Base, crown moldings, trimmings). Please consult the subcategory accessories in the wine cellar rack category. 

Moldings for the sides of your Vintage Keeper wine racks. F22C

• 2 moldings per set

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 7 bottle racks by La Vieille Garde
320 bottles capacity
Dimensions : 76.5" H x 56" W x 39" D

Includes  : 

• CID32
• CID48
• CID64
• CID96
• CIC32
• CIC48
• BM-17.5
• BM-35
• B-COIN

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 6 bottle racks by La Vieille Garde
172 bottles capacity
Dimensions : 76.5" H x 62.5" W x 9" D

Includes  : 

• CIS8 (2)
• CIS12 (2)
• CID32 (2)
• BIN42
• MODVERRE18
• ITOP4 (2)
• BM-96

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 3 bottle racks by La Vieille Garde
160 bottles capacity
Dimensions : 76.5" H x 70" W x 9" D

Includes  : 

• BIN42 (2)
• ARCHE-I20
• MODVERRE12 (2)
• MODVERRE16 (2)
• BM-96

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 12 bottle racks by La Vieille Garde
73 bottles capacity
Dimensions : 76.5" H x 17.5" W x 9" D

Includes  : 

• BIN42
• BINTAB-C
• BM-17.5

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 11 bottle racks by La Vieille Garde
72 bottles capacity
Dimensions : 76.5" H x 21" W x 21" D

Includes  : 

• CIC32
• CICI40
• B-COIN

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 1 bottle racks by La Vieille Garde. 
406 bottles capacity
Dimensions: 76.5" H x 77.5" W x 9" D

Includes  : 

• CIDI40 (2)
• BIN42 (2)
• DIA36 (2)
• ARCHEI20-C
• CMB-12 BK (2)
• BM-96

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

A quintessential Quebec product for your wine cellar, the Classic LVG collection of high-end torrefied linden racks features over 40 different modules.

This all-natural technology provides the wood with protection against warping, splitting, mould and fungus, as well as exceptional mechanical properties.

Kit No. 8 bottle racks by La Vieille Garde
88 bottles capacity
Dimensions : 76.5" H x 35" W x 9" D

Includes  : 

• CID64
• ARCHE24
• BM-35

Assembly hardware and wall mounting brackets included

Available in 12'' depth by special order

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Bottle rack for wine cases F06B
Capacity: 36 to 72 bottles
Dimensions: 48″ H x 16″ W x 9″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Bottle rack for wine cases F06A
Capacity: 24 to 48 bottles
Dimensions: 32″ H x 16″ W x 9″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Diamond bin bottle rack F09B
Capacity: 5 cases, 60 bottles
Dimensions: 48″ H x 24″ W x 9″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Diamond bin bottle rack F05A
Capacity: 80 bottles
Dimensions: 32″ H x 16″ W x 9″ D

4 bin deviders included.

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

Wine rack diamond in redwood, by Vintage Keeper.

• Capacity : 120 bottles
• Dimensions : 32″ W x 48″ H x 9″ D

Sold with the 6 dividers.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Corner bottle rack for Bordeaux-type F04A
Capacity: 32 bottles
Dimensions: 32″ H x 19.5″ W x 19.5″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Bottle rack for half-bottles F03B
Capacity: 75 half-bottles
Dimensions: 48″ H x 16″ W x 9″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

This collection of California red cedar bottle racks features over 20 different modules. They're easy to assemble and offer a wide range of possible configurations for your wine cellar. Various bottle formats, from half-bottles to Bordeaux, Champagne and Magnum, can be stored in their respective modules.

Bottle rack for half-bottles F03A
Capacity: 50 half-bottles
Dimensions: 32″ H x 16″ W x 9″ D

Assembly parts and wall mounting clips included.

Bases/Crowns sold separately.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 HIGH EFFICIENCY

• This three-component system has the capacity to cool a cellar of up to 3000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed outdoors and indoors
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 3000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 HIGH EFFICIENCY

• Cooling capacity of 2000 cu. ft. *
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 2000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 HIGH EFFICIENCY

• Cooling capacity of 1000 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM MINI-SPLIT HIGH EFFICIENCY

• Cooling capacity of 500 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 4000 HIGH EFFICIENCY 

• Cooling capacity of 1000 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty, parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 8000 HIGH EFFICIENCY

• Cooling capacity of 2000 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty, parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

This ducting kit is designed to relocate unwanted heat from the exhaust of the SC PRO 2000, 3000 and 4000 systems from WhisperKOOL.

• Dimensions in inches: 14W x 36D x 8H
• Galvanized Steel Base
• Galvanized Steel Cabinet Embossed (20 GA)
• Hinged access for easier servicing
• Wind safety latch
• Easily Assembled in the shop or on the job

Kit includes:

• Duct Plenum
• Transition with integrated heat sensor
• 8″ In-line fan
• 8″ Adjustable Elbow