whisperkool

WINE CELLAR COOLING UNIT PLATINUM 4000 HIGH EFFICIENCY

• Cooling capacity of 1000 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 1000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM DUCTED 8000 HIGH EFFICIENCY

• This two-component system has the capacity to cool a cellar of up to 1000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers 220 volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 DUCTED OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³ *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers Omega 110volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 HIGH EFFICIENCY

• Cooling capacity of 2000 cu. ft. *
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 2000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers High efficiency 220volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 3000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 3000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 HIGH EFFICIENCY

• This three-component system has the capacity to cool a cellar of up to 3000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed outdoors and indoors
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 3000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

Quantum Series cooling systems are designed for larger wine cellars with high cooling volumes. The Quantum cooling unit is one of the most efficient units we offer. This split system features multiple ducted installation options, facilitating installation flexibility and accessibility. The unit can be installed up to 25 feet from the wine cellar, creating a virtually silent cellar environment. The evaporator coil is electrofine-coated to minimize corrosion.

The Quantum Series offers 4 models according to cellar size:

Quantum 9000: 3000 cubic feet*
Quantum 12000: 4000 cubic feet*
Quantum18000: 5000 cubic feet*
Quantum 24000: 7500 cubic feet*

Key features

• Flexible installation options
• Variable fan speed
• Proven cooling performance
• In-bottle probe for precise cellar temperature measurement
• Quiet operation
• Quick-access components for easy maintenance
• Corrosion-resistant drip tray
• Durable black paint finish

This system uses WhisperKOOL's liquid temperature probe. By monitoring liquid temperature instead of air temperature, the bottle probe ensures that your wine cellar maintains optimal wine-aging conditions.

NOTE: Installation by a professional or licensed contractor is recommended

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 2000 BY WHISPERKOOL

• Cooling capacity of 300 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Option vent available
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 3000 BY WHISPERKOOL

• Cooling capacity of 650 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 3000 BY WHISPERKOOL

• Cooling capacity of 650 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 4000 BY WHISPERKOOL

• Cooling capacity of 1000 cu. ft.
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,9

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system.

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 4000 BY WHISPERKOOL

• Cooling capacity of 1000 cu. ft.
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,9

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system.

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 8000 BY WHISPERKOOL

• Wine cellar Cooling capacity of 2000 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 10.3

Consult PDF for more information. Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

REFURBISHED, LIMITED QUANTITY

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

The Extreme ducting plenum is specifically designed for use with WhisperKOOL Extreme ti and tiR Through-the-Wall systems, including the 3500ti/3500tiR and 5000ti/5000tiR models. This essential accessory offers full installation flexibility by allowing you to duct either side of the cooling unit, making it an ideal solution for those seeking custom installation options.

With the Extreme ducting plenum, you can easily direct the cold air into your wine cellar through a vent, or alternatively, duct the hot exhaust air out of the home to maintain a comfortable and stable environment. This versatility gives you the freedom to tailor your system to your specific cellar layout and installation preferences, ensuring the best possible performance and efficiency for your cooling unit.

• Easy to install on to the unit
• Duct the evaporator or condenser side to fit all your installation needs.
• For the evaporator & condenser of the Extreme ti and tiR – Through the Wall units

See the specification sheet for details.

The Extreme ducting plenum is specifically designed for use with WhisperKOOL Extreme ti and tiR Through-the-Wall systems, including the 8000ti/8000tiR models. This essential accessory offers full installation flexibility by allowing you to duct either side of the cooling unit, making it an ideal solution for those seeking custom installation options.

With the Extreme ducting plenum, you can easily direct the cold air into your wine cellar through a vent, or alternatively, duct the hot exhaust air out of the home to maintain a comfortable and stable environment. This versatility gives you the freedom to tailor your system to your specific cellar layout and installation preferences, ensuring the best possible performance and efficiency for your cooling unit.

• Easy to install on to the unit
• Duct the evaporator or condenser side to fit all your installation needs.
• For the evaporator & condenser of the Extreme ti and tiR – Through the Wall units

See the specification sheet for details.

The ΩMEGA Duct Kit is designed to enhance the performance and installation flexibility of your ΩMEGA Condensing Unit, allowing you to duct the system up to 25 feet away. Whether you’re installing in closets, maintenance rooms, attics, crawl spaces, or under staircases, this optional ducting kit ensures optimal airflow, ventilation, and cooling efficiency in confined or warm environments.

• Customizable airflow
• Extended ducting capability 
• Reduced noise & heat Impact 
• Seamless integration with your Omega condenser
• Allows your Omega condenser to perform efficiently in challenging environments like attics, crawlspaces, soffits, and closets.
• For 10" supply and return ducts

Compatible with all Omega condenser.

This ducting kit is designed to relocate unwanted heat from the exhaust of the SC PRO 2000, 3000 and 4000 systems from WhisperKOOL.

• Dimensions in inches: 14W x 36D x 8H
• Galvanized Steel Base
• Galvanized Steel Cabinet Embossed (20 GA)
• Hinged access for easier servicing
• Wind safety latch
• Easily Assembled in the shop or on the job

Kit includes:

• Duct Plenum
• Transition with integrated heat sensor
• 8″ In-line fan
• 8″ Adjustable Elbow

This ducting kit is designed to relocate unwanted heat from the exhaust of the SC PRO systems from WhisperKOOL.

• Dimensions in inches: 14W x 43D x 8H
• Galvanized Steel Base
• Galvanized Steel Cabinet Embossed (20 GA)
• Hinged access for easier servicing
• Wind safety latch
• Easily Assembled in the shop or on the job

Kit includes:

• Duct Plenum
• Transition with integrated heat sensor
• 8″ In-line fan
• 8″ Adjustable Elbow.

The Exterior Grille protects the exhaust side of the system from the weather elements when installed through an exterior wall.
Suitable for 6000i/8000i units from the SC series.

The Exterior Grille protects the exhaust side of the system from the weather elements when installed through an exterior wall.
Suitable for 2000i/3000i/4000i units from the SC series.