Wine cellar cooling unit  for a volume up to  20m3/600 cubic feet) Requires 110v/15amp (wall insulation at R22 minimum, does not adapt to glass spaces)

The SMARTER way to protect your wine with the KoolR and KoolR Plus Systems. Conveniently monitor temperatures outside your wine cellar with our lighted display. Let our super smart controls sense conditions in your room and adjust the power levels automatically.  Sleek silver grille to streamline any install. Our unit will run as quietly as your conditions allow. Precise temperature and higher humidity levels.

Dimensions : 39cm X 41.5cm X 24.5cm / 15.5p X 16.25p X 9.5p

See the folder Documentation for the installation dimensions

The Wine-R is the newest wine cellar cooling unit created in Quebec. It combines efficiency and durability at an affordable price.

• Cooling capacity of up to 650 cubic feet*
• Compact size for easy installation
• Quiet and discreet operation
• Elegantly blends into the space with its black grille finish
• Easy to use with a wired digital thermostat
• Lightweight and easy to handle, weighing only 45 pounds - 21 kg
• Temperature range of 10° to 25° Celsius, adjustable to your preference
• 2 year parts and labor warranty
• Stainless steel grid available

* Heat load calculation varies depending on several factors. Contact our team for an evaluation of your project.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

The D025 is a ducted wine cellar cooling unit for small residential and commercial wine cellars. The D025 is the best wine cellar cooling unit for cellars from 400 to 2,000 cubic feet, depending upon use and room construction.

CHARACTERISTICS

• Performance : 3,000 BTH/h
• Capacity : 400 cu. ft. to 2,000 cu. ft. *
• Dimensions (Length x Width x Height) : 33’’ x 14’’ x 14’’
• Heating Element : Optional (1000 watt heating element allows to protect your cellar from low ambient temperatures)
• Cooling temperature from 10 degrees to 15 degrees for basic models (cooling temperature from 8 degrees to 16 degrees for models with service temperature)
• Air Flow : 245 CFM
• Drain : ½’’ flexible
• Ducks : 8’’ isolated
• Weight : 80 pounds
• Electrical : Dedicated circuit of 20 amps 115v/1ph/60Hz
• Certification : UL 1995 & CSA C22.2
• Warranty : 1 year (Parts et Labor) + 1 year (Parts)
• Includes :
  • 1 x Remote control combo temperature + humidity
  • 1 x Air input junction ring
  • 1 x Air output junction ring

* This specification is only to be used as reference point. It is important to ask your in-store advisor to calculate the heat load specific to your room in order to recommend the right cooling unit.

Standard features of this Wine Guardian® unit:

• Removable control panel for easy access
• Multiple supply-air openings for installation flexibility
• High static pressure fans for extended lengths of ductwork
• Creates virtually no noise in cellar
• Lightweight, corrosion resistant, all aluminum outer body
• Remote user interface control system
• Most energy-efficient unit on the market
• Unit is located outside the wine cellar
• Better air distribution and temperature control than through-the-wall or ductless split systems
• Easier to service
• No visible mechanical equipment in the wine cellar

WINE CELLAR COOLING UNIT SC PRO 4000 BY WHISPERKOOL

• Cooling capacity of 1000 cu. ft.
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,9

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system.

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT MINI-SPLIT HIGH EFFICIENCY

• Cooling capacity of 500 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

The Ceiling Mount Series offers high power systems with a Split type installation. For parts from 500 to 2000 ft3, you will get an efficient, powerful and reliable device. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 3000 BY WHISPERKOOL

• Cooling capacity of 650 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

Quantum Series cooling systems are designed for larger wine cellars with high cooling volumes. The Quantum cooling unit is one of the most efficient units we offer. This split system features multiple ducted installation options, facilitating installation flexibility and accessibility. The unit can be installed up to 25 feet from the wine cellar, creating a virtually silent cellar environment. The evaporator coil is electrofine-coated to minimize corrosion.

The Quantum Series offers 4 models according to cellar size:

Quantum 9000: 3000 cubic feet*
Quantum 12000: 4000 cubic feet*
Quantum18000: 5000 cubic feet*
Quantum 24000: 7500 cubic feet*

Key features

• Flexible installation options
• Variable fan speed
• Proven cooling performance
• In-bottle probe for precise cellar temperature measurement
• Quiet operation
• Quick-access components for easy maintenance
• Corrosion-resistant drip tray
• Durable black paint finish

This system uses WhisperKOOL's liquid temperature probe. By monitoring liquid temperature instead of air temperature, the bottle probe ensures that your wine cellar maintains optimal wine-aging conditions.

NOTE: Installation by a professional or licensed contractor is recommended

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 8000 TIR BY WHISPERKOOL

• Cooling capacity of 2000 cu. ft.*
• Through-the-wall application
• KDT Plus remote control and thermostat (can be installed outside the cellar)
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 5000 TIR BY WHISPERKOOL

• Cooling capacity of 1250 cu. ft.*
• Through-the-wall application
• KDT Plus remote control and thermostat (can be installed outside the cellar)
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 3500TI BY WHISPERKOOL

• Cooling capacity of 800 cu. ft.*
• Through-the-wall application
• KDT Plus remote control and thermostat (can be installed outside the cellar)
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 2000 BY WHISPERKOOL

• Cooling capacity of 300 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Option vent available
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

REFURBISHED, LIMITED QUANTITY

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 DUCTED OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³ *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers Omega 110volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 DUCTED OMEGA

• This two-component system has the capacity to cool a cellar of up to 1000 ft³ *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers Omega 110volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers High efficiency 220volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 3000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 3000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 1000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM MINI-SPLIT OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT TWIN 9000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 8000 OMEGA

• Cooling capacity of 2000 cu. ft.*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) Omega operating on 110 volts.
• The condenser unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 4000 OMEGA

• Cooling capacity of 1000 cu. ft. *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) Omega operating on 110 volts.
• The condenser unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT MINI-SPLIT OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential
  

2 year warranty parts and labor
Consult PDF for more information

Ceiling Mount Series by WhisperKOOL

The Ceiling Mount Series offers high power systems with a Split type installation. For parts from 500 to 2000 ft3, you will get an efficient, powerful and reliable device. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.