WhisperKOOL

WINE CELLAR COOLING UNIT EXTREME 8000TI BY WHISPERKOOL

• Cooling capacity of 2000 cu. ft.*
• Through-the-wall application
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Advanced electronic control system
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 5000 TIR BY WHISPERKOOL

• Cooling capacity of 1250 cu. ft.*
• Through-the-wall application
• KDT Plus remote control and thermostat (can be installed outside the cellar)
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

The Phantom Series combine powerful cooling capacity with flexible installation options. Its powerful blowers can be reoriented to the right, left, or top of the unit. This grants the customer the option of installing the unit in any ducting configuration they desire.

The Phantom combines sleek, modern design with quietness, customizable installation options, and proven performance.

The Phantom Serie offers 3 models depending on cellar size:

Phantom 3500: 800 cu ft*
Phantom 5000: 1250 cu ft*
Phantom 8000: 2000 cu ft*

Key features

• Flexible installation options
• Proven cooling performance
• Liquid-temperature-measuring bottle probe
• Quiet operation
• Quick-to-access components for ease of maintenance
• Corrosion-resistant drip tray
• Black powder-coated paintscheme
• Suitable for operation in ambient temperatures as high as 110°F

This system uses WhisperKOOL’s liquid temperature-measuring bottle probe. By monitoring liquid temperature instead of air temperature, the bottle probe ensures that your wine cellar maintains optimal wine-aging conditions.

NOTE: Installation by a professional or licensed contractor is recommended

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM MINI-SPLIT OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM MINI-SPLIT HIGH EFFICIENCY

• Cooling capacity of 500 cu. ft.*
• Ultra-quiet and efficient operation
• Advanced electronic control system
• 2-speed fan switch
• Flare fittings for easy installation
• Wi-Fi thermostat 24v conversion kit available
• Hex mesh grille with air filter
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• Alarm capabilities
• 55ºF temperature differential
• Can be installed outside the house

2 year warranty parts and labor
Consult PDF for more information

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 5000 TI BY WHISPERKOOL

• Cooling capacity of 1250 cu. ft.*
• Through-the-wall application
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Advanced electronic control system
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Consult PDF for more information.
Warranty: 2 years parts and labor, 5 years compressor

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 3500TI BY WHISPERKOOL

• Cooling capacity of 800 cu. ft.*
• Through-the-wall application
• KDT Plus remote control and thermostat (can be installed outside the cellar)
• Variable speed fans
• Operates in extreme environments
• Simple installation – between wall studs
• Liquid bottle probe
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT EXTREME 3500TI BY WHISPERKOOL

• Cooling capacity of 800 cu. ft.*
• Through-the-wall application
• Variable speed fans
• Operates in extreme environments
• Simple installation
• Advanced electronic control system
• Liquid bottle probe
• Humidity control 60 – 70%
• Energy saving mode
• 55°F temperature differential

Warranty: 2 years parts and labor, 5 years compressor

Consult PDF for more information.

Extreme Series by WhisperKOOL

Years of experience working within the wine cellar industry have inspired them to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – their highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. 

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 8000 BY WHISPERKOOL

• Wine cellar Cooling capacity of 2000 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 10.3

Consult PDF for more information. Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 4000 BY WHISPERKOOL

• Cooling capacity of 1000 cu. ft.
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,9

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system.

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 3000 BY WHISPERKOOL

• Cooling capacity of 650 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 2000 BY WHISPERKOOL

• Cooling capacity of 300 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Option vent available
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 4000 BY WHISPERKOOL

• Cooling capacity of 1000 cu. ft.
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,9

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system.

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SLIMLINE LS BY WHISPERKOOL

REFURBISHED, LIMITED QUANTITY

The WhisperKOOL Slimline LS is a very compact, through-the-wall monoblock cooling unit ideal for bulkhead installation.

This unit is considered the best in its class, regardless of brand.

The dimensions allow for discreet installation above the wine cellar door (21.5 “W x 22.16 ‘D x 10.33 ’H ).

• Cooling capacity of 650 cu. ft. (300 cu. ft. at low speed)*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT SC PRO 3000 BY WHISPERKOOL

• Cooling capacity of 650 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

This ducting kit is designed to relocate unwanted heat from the exhaust of the SC PRO systems from WhisperKOOL.

• Dimensions in inches: 14W x 43D x 8H
• Galvanized Steel Base
• Galvanized Steel Cabinet Embossed (20 GA)
• Hinged access for easier servicing
• Wind safety latch
• Easily Assembled in the shop or on the job

Kit includes:

• Duct Plenum
• Transition with integrated heat sensor
• 8″ In-line fan
• 8″ Adjustable Elbow.

This ducting kit is designed to relocate unwanted heat from the exhaust of the SC PRO 2000, 3000 and 4000 systems from WhisperKOOL.

• Dimensions in inches: 14W x 36D x 8H
• Galvanized Steel Base
• Galvanized Steel Cabinet Embossed (20 GA)
• Hinged access for easier servicing
• Wind safety latch
• Easily Assembled in the shop or on the job

Kit includes:

• Duct Plenum
• Transition with integrated heat sensor
• 8″ In-line fan
• 8″ Adjustable Elbow

The exterior housing for Quantum system is designed to protect your condenser from harsh weather conditions when installed outdoors. This housing ensures that your cooling system remains shielded from the elements, preserving its performance and longevity.

• Galvanized Steel Base
• Necessary Fasteners Provided
• Wind Safety Latch — See Insert
• Hinged Access for Easier Servicing
• All Front Louver are at a 45° degree Angle
• Easily Assembled in the Shop or on the Job
• Galvanized Steel Cabinet Embossed — 20 GA

Compatible with Quantum condensers.

Take advantage of the latest advances in smart thermostats with the all-new 24V thermostat conversion kit to install on your Quantum which allows you to use cutting-edge technology to control the environment in your wine cellar.

Features:

• Connect your thermostat to Wi-Fi to control the temperature from your phone, tablet, or laptop.
• Monitor operating time and energy consumption.
• Set up alarm notifications.
• Check the conditions in your cellar from your mobile device.
• The smart thermostat is not included.
  

*NOTE: WhisperKOOL does not supply a smart thermostat. By selecting the 24V thermostat conversion kit, you acknowledge that the system will not be equipped with the standard WhisperKOOL control or liquid level sensor. You will need to source and purchase your own 24V smart thermostat to operate the equipment. The WhisperKOOL customer satisfaction team does not provide technical support for smart thermostats.

Take advantage of the latest advances in smart thermostats with the all-new 24V thermostat conversion kit to install on your Platinum Split which allows you to use cutting-edge technology to control the environment in your wine cellar.

Features:

• Connect your thermostat to Wi-Fi to control the temperature from your phone, tablet, or laptop.
• Monitor operating time and energy consumption.
• Set up alarm notifications.
• Check the conditions in your cellar from your mobile device.
• The smart thermostat is not included.
  

*NOTE: WhisperKOOL does not supply a smart thermostat. By selecting the 24V thermostat conversion kit, you acknowledge that the system will not be equipped with the standard WhisperKOOL control or liquid level sensor. You will need to source and purchase your own 24V smart thermostat to operate the equipment. The WhisperKOOL customer satisfaction team does not provide technical support for smart thermostats.

Take advantage of the latest advances in smart thermostats with the all-new 24V thermostat conversion kit to install on your Phantom which allows you to use cutting-edge technology to control the environment in your wine cellar.

Features:

• Connect your thermostat to Wi-Fi to control the temperature from your phone, tablet, or laptop.
• Monitor operating time and energy consumption.
• Set up alarm notifications.
• Check the conditions in your cellar from your mobile device.
• The smart thermostat is not included.
  

*NOTE: WhisperKOOL does not supply a smart thermostat. By selecting the 24V thermostat conversion kit, you acknowledge that the system will not be equipped with the standard WhisperKOOL control or liquid level sensor. You will need to source and purchase your own 24V smart thermostat to operate the equipment. The WhisperKOOL customer satisfaction team does not provide technical support for smart thermostats.

Take advantage of the latest advances in smart thermostats with the all-new 24V thermostat conversion kit to install on your Extreme which allows you to use cutting-edge technology to control the environment in your wine cellar.

Features:

• Connect your thermostat to Wi-Fi to control the temperature from your phone, tablet, or laptop.
• Monitor operating time and energy consumption.
• Set up alarm notifications.
• Check the conditions in your cellar from your mobile device.
• The smart thermostat is not included.
  

*NOTE: WhisperKOOL does not supply a smart thermostat. By selecting the 24V thermostat conversion kit, you acknowledge that the system will not be equipped with the standard WhisperKOOL control or liquid level sensor. You will need to source and purchase your own 24V smart thermostat to operate the equipment. The WhisperKOOL customer satisfaction team does not provide technical support for smart thermostats.

Take advantage of the latest advances in smart thermostats with the all-new 24V thermostat conversion kit to install on your Ceiling Mount, which allows you to use cutting-edge technology to control the environment in your wine cellar.

Features:

• Connect your thermostat to Wi-Fi to control the temperature from your phone, tablet, or laptop.
• Monitor operating time and energy consumption.
• Set up alarm notifications.
• Check the conditions in your cellar from your mobile device.
• The smart thermostat is not included.
  

*NOTE: WhisperKOOL does not supply a smart thermostat. By selecting the 24V thermostat conversion kit, you acknowledge that the system will not be equipped with the standard WhisperKOOL control or liquid level sensor. You will need to source and purchase your own 24V smart thermostat to operate the equipment. The WhisperKOOL customer satisfaction team does not provide technical support for smart thermostats.

The exterior housing for Omega system is designed to protect your condenser from harsh weather conditions when installed outdoors. This housing ensures that your cooling system remains shielded from the elements, preserving its performance and longevity.

• Galvanized Steel Base
• Necessary Fasteners Provided
• Wind Safety Latch — See Insert
• Hinged Access for Easier Servicing
• All Front Louver are at a 45° degree Angle
• Easily Assembled in the Shop or on the Job
• Galvanized Steel Cabinet Embossed — 20 GA

Compatible with Omega condensers.